Optimisation is a complicated task because it ultimately requires understanding of the whole system. While it may be possible to do some local optimisations with small knowledge of your system or application, the more optimal you want your system to become the more you will have to know about it.
This chapter will try to explain and give some examples of different ways to optimise MySQL. Remember, however, that there are always some (increasingly harder) additional ways to make the system even faster.
The most important part for getting a system fast is of course the basic design. You also need to know what kinds of things your system will be doing, and what your bottlenecks are.
The most common bottlenecks are:
When using the MyISAM storage engine, MySQL uses extremely fast table locking (multiple readers / single writers). The biggest problem with this table type is a if you have a mix of a steady stream of updates and slow selects on the same table. If this is a problem with some tables, you can use another table type for these. See section 7 MySQL Table Types.
MySQL can work with both transactional and not transactional tables. To be able to work smoothly with not transactional tables (which can't rollback if something goes wrong), MySQL has the following rules:
NULL in a
NOT NULL column or a too big numerical value in a numerical
column, MySQL will instead of giving an error instead set the column to
the 'best possible value'. For numerical values this is 0, the smallest
possible values or the largest possible value. For strings this is
either the empty string or the longest possible string that can be in
the column.
NULL
For more information about this, see See section 1.8.5 How MySQL deals with constraints.
The above means that one should not use MySQL to check fields content, but one should do this in the application.
Because all SQL servers implement different parts of SQL, it takes work to write portable SQL applications. For very simple selects/inserts it is very easy, but the more you need the harder it gets. If you want an application that is fast with many databases it becomes even harder!
To make a complex application portable you need to choose a number of SQL servers that it should work with.
You can use the MySQL crash-me program/web-page
http://www.mysql.com/information/crash-me.php to find functions,
types, and limits you can use with a selection of database
servers. Crash-me now tests far from everything possible, but it
is still comprehensive with about 450 things tested.
For example, you shouldn't have column names longer than 18 characters if you want to be able to use Informix or DB2.
Both the MySQL benchmarks and crash-me programs are very
database-independent. By taking a look at how we have handled this, you
can get a feeling for what you have to do to write your application
database-independent. The benchmarks themselves can be found in the
`sql-bench' directory in the MySQL source
distribution. They are written in Perl with DBI database interface
(which solves the access part of the problem).
See http://www.mysql.com/information/benchmarks.html for the results from this benchmark.
As you can see in these results, all databases have some weak points. That is, they have different design compromises that lead to different behaviour.
If you strive for database independence, you need to get a good feeling for each SQL server's bottlenecks. MySQL is very fast in retrieving and updating things, but will have a problem in mixing slow readers/writers on the same table. Oracle, on the other hand, has a big problem when you try to access rows that you have recently updated (until they are flushed to disk). Transaction databases in general are not very good at generating summary tables from log tables, as in this case row locking is almost useless.
To get your application really database-independent, you need to define an easy extendable interface through which you manipulate your data. As C++ is available on most systems, it makes sense to use a C++ classes interface to the databases.
If you use some specific feature for some database (like the
REPLACE command in MySQL), you should code a method for
the other SQL servers to implement the same feature (but slower). With
MySQL you can use the /*! */ syntax to add
MySQL-specific keywords to a query. The code inside
/**/ will be treated as a comment (ignored) by most other SQL
servers.
If high performance is more important than exactness, as in some web applications, it is possibile to create an application layer that caches all results to give you even higher performance. By letting old results 'expire' after a while, you can keep the cache reasonably fresh. This provides a method to handle high load spikes, in which case you can dynamically increase the cache and set the expire timeout higher until things get back to normal.
In this case the table creation information should contain information of the initial size of the cache and how often the table should normally be refreshed.
During MySQL initial development, the features of MySQL were made to fit our largest customer. They handle data warehousing for a couple of the biggest retailers in Sweden.
From all stores, we get weekly summaries of all bonus card transactions, and we are expected to provide useful information for the store owners to help them find how their advertisement campaigns are affecting their customers.
The data is quite huge (about 7 million summary transactions per month), and we have data for 4-10 years that we need to present to the users. We got weekly requests from the customers that they want to get 'instant' access to new reports from this data.
We solved this by storing all information per month in compressed 'transaction' tables. We have a set of simple macros (script) that generates summary tables grouped by different criteria (product group, customer id, store ...) from the transaction tables. The reports are web pages that are dynamically generated by a small Perl script that parses a web page, executes the SQL statements in it, and inserts the results. We would have used PHP or mod_perl instead but they were not available at that time.
For graphical data we wrote a simple tool in C that can produce
GIFs based on the result of an SQL query (with some processing of the
result). This is also dynamically executed from the Perl script that
parses the HTML files.
In most cases a new report can simply be done by copying an existing script and modifying the SQL query in it. In some cases, we will need to add more fields to an existing summary table or generate a new one, but this is also quite simple, as we keep all transactions tables on disk. (Currently we have at least 50G of transactions tables and 200G of other customer data.)
We also let our customers access the summary tables directly with ODBC so that the advanced users can themselves experiment with the data.
We haven't had any problems handling this with quite modest Sun Ultra SPARCstation (2x200 Mhz). We recently upgraded one of our servers to a 2 CPU 400 Mhz UltraSPARC, and we are now planning to start handling transactions on the product level, which would mean a ten-fold increase of data. We think we can keep up with this by just adding more disk to our systems.
We are also experimenting with Intel-Linux to be able to get more CPU power cheaper. Now that we have the binary portable database format (new in Version 3.23), we will start to use this for some parts of the application.
Our initial feelings are that Linux will perform much better on low-to-medium load and Solaris will perform better when you start to get a high load because of extreme disk IO, but we don't yet have anything conclusive about this. After some discussion with a Linux Kernel developer, this might be a side effect of Linux giving so much resources to the batch job that the interactive performance gets very low. This makes the machine feel very slow and unresponsive while big batches are going. Hopefully this will be better handled in future Linux Kernels.
This should contain a technical description of the MySQL
benchmark suite (and crash-me), but that description is not
written yet. Currently, you can get a good idea of the benchmark by
looking at the code and results in the `sql-bench' directory in any
MySQL source distributions.
This benchmark suite is meant to be a benchmark that will tell any user what things a given SQL implementation performs well or poorly at.
Note that this benchmark is single threaded, so it measures the minimum time for the operations. We plan to in the future add a lot of multi-threaded tests to the benchmark suite.
For example, (run on the same NT 4.0 machine):
| Reading 2000000 rows by index | Seconds | Seconds |
| mysql | 367 | 249 |
| mysql_odbc | 464 | |
| db2_odbc | 1206 | |
| informix_odbc | 121126 | |
| ms-sql_odbc | 1634 | |
| oracle_odbc | 20800 | |
| solid_odbc | 877 | |
| sybase_odbc | 17614 |
| Inserting (350768) rows | Seconds | Seconds |
| mysql | 381 | 206 |
| mysql_odbc | 619 | |
| db2_odbc | 3460 | |
| informix_odbc | 2692 | |
| ms-sql_odbc | 4012 | |
| oracle_odbc | 11291 | |
| solid_odbc | 1801 | |
| sybase_odbc | 4802 |
In the above test MySQL was run with a 8M index cache.
We have gathered some more benchmark results at http://www.mysql.com/information/benchmarks.html.
Note that Oracle is not included because they asked to be removed. All Oracle benchmarks have to be passed by Oracle! We believe that makes Oracle benchmarks very biased because the above benchmarks are supposed to show what a standard installation can do for a single client.
To run the benchmark suite, you have to download a MySQL source distribution, install the Perl DBI driver, the Perl DBD driver for the database you want to test and then do:
cd sql-bench perl run-all-tests --server=#
where # is one of supported servers. You can get a list of all options
and supported servers by doing run-all-tests --help.
crash-me tries to determine what features a database supports and
what its capabilities and limitations are by actually running
queries. For example, it determines:
VARCHAR column can be
We can find the result from crash-me on a lot of different databases at
http://www.mysql.com/information/crash-me.php.
You should definitely benchmark your application and database to find out where the bottlenecks are. By fixing it (or by replacing the bottleneck with a 'dummy module') you can then easily identify the next bottleneck (and so on). Even if the overall performance for your application is sufficient, you should at least make a plan for each bottleneck, and decide how to solve it if someday you really need the extra performance.
For an example of portable benchmark programs, look at the MySQL benchmark suite. See section 5.1.4 The MySQL Benchmark Suite. You can take any program from this suite and modify it for your needs. By doing this, you can try different solutions to your problem and test which is really the fastest solution for you.
It is very common that some problems only occur when the system is very heavily loaded. We have had many customers who contact us when they have a (tested) system in production and have encountered load problems. In every one of these cases so far, it has been problems with basic design (table scans are not good at high load) or OS/Library issues. Most of this would be a lot easier to fix if the systems were not already in production.
To avoid problems like this, you should put some effort into benchmarking your whole application under the worst possible load! You can use Super Smack for this, and it is available at: http://www.mysql.com/Downloads/super-smack/super-smack-1.0.tar.gz. As the name suggests, it can bring your system down to its knees if you ask it, so make sure to use it only on your development systems.
SELECTs and Other QueriesFirst, one thing that affects all queries: The more complex permission system setup you have, the more overhead you get.
If you do not have any GRANT statements done, MySQL will
optimise the permission checking somewhat. So if you have a very high
volume it may be worth the time to avoid grants. Otherwise, more
permission check results in a larger overhead.
If your problem is with some explicit MySQL function, you can always time this in the MySQL client:
mysql> SELECT BENCHMARK(1000000,1+1); +------------------------+ | BENCHMARK(1000000,1+1) | +------------------------+ | 0 | +------------------------+ 1 row in set (0.32 sec)
The above shows that MySQL can execute 1,000,000 +
expressions in 0.32 seconds on a PentiumII 400MHz.
All MySQL functions should be very optimised, but there may be
some exceptions, and the BENCHMARK(loop_count,expression) is a
great tool to find out if this is a problem with your query.
EXPLAIN Syntax (Get Information About a SELECT)
EXPLAIN tbl_name
or EXPLAIN SELECT select_options
EXPLAIN tbl_name is a synonym for DESCRIBE tbl_name or
SHOW COLUMNS FROM tbl_name.
When you precede a SELECT statement with the keyword EXPLAIN,
MySQL explains how it would process the SELECT, providing
information about how tables are joined and in which order.
With the help of EXPLAIN, you can see when you must add indexes
to tables to get a faster SELECT that uses indexes to find the
records.
You should frequently run ANALYZE TABLE to update table statistics
such as cardinality of keys which can affect the choices the optimiser
makes. See section 4.5.2 ANALYZE TABLE Syntax.
You can also see if the optimiser joins the tables in an optimal
order. To force the optimiser to use a specific join order for a
SELECT statement, add a STRAIGHT_JOIN clause.
For non-simple joins, EXPLAIN returns a row of information for each
table used in the SELECT statement. The tables are listed in the order
they would be read. MySQL resolves all joins using a single-sweep
multi-join method. This means that MySQL reads a row from the first
table, then finds a matching row in the second table, then in the third table
and so on. When all tables are processed, it outputs the selected columns and
backtracks through the table list until a table is found for which there are
more matching rows. The next row is read from this table and the process
continues with the next table.
In MySQL version 4.1 the EXPLAIN output was changed to work better
with constructs like UNIONs, subqueries and derived tables. Most
notable is the addition of two new columns: id and select_type.
Output from EXPLAIN consists of the following columns:
id
SELECT identifier, the sequential number of this SELECT
within the query.
select_type
SELECT clause, which can be any of the following:
SIMPLE
SELECT (without UNIONs or subqueries).
PRIMARY
SELECT.
UNION
UNION SELECTs.
DEPENDENT UNION
UNION SELECTSs, dependent on outer
subquery.
SUBQUERY
SELECT in subquery.
DEPENDENT SUBQUERY
SELECT, dependent on outer subquery.
DERIVED
SELECT.
table
type
system
const join type.
const
const tables are very fast as they are read only once!
const is used when you compare all parts of a
PRIMARY/UNIQUE key with constants:
SELECT * FROM const_table WHERE primary_key=1; SELECT * FROM const_table WHERE primary_key_part1=1 and primary_key_part2=2;
eq_ref
const types. It is used when all parts of an index are used by
the join and the index is UNIQUE or a PRIMARY KEY.
eq_ref can be used for indexed columns that is compared with
=. The compared item may be a constant or an expression that uses
columns from tables that are read before this table.
In the following examples, ref_table will be able to use eq_ref
SELECT * FROM ref_table,other_table WHERE ref_table.key_column=other_table.column; SELECT * FROM ref_table,other_table WHERE ref_table.key_column_part1=other_table.column AND ref_table.key_column_part2=1;
ref
ref is used if the join
uses only a leftmost prefix of the key, or if the key is not UNIQUE
or a PRIMARY KEY (in other words, if the join cannot select a single
row based on the key value). If the key that is used matches only a few rows,
this join type is good.
ref can be used for indexed columns that is compared with =.
In the following examples, ref_table will be able to use ref
SELECT * FROM ref_table WHERE key_column=expr; SELECT * FROM ref_table,other_table WHERE ref_table.key_column=other_table.column; SELECT * FROM ref_table,other_table WHERE ref_table.key_column_part1=other_table.column AND ref_table.key_column_part2=1;
ref_or_null
ref, but with the addition that we will do an extra search for
rows with NULL. See section 5.2.5 How MySQL Optimises IS NULL.
SELECT * FROM ref_table WHERE key_column=expr OR key_column IS NULL;This optimization is new for MySQL 4.1.1 and is mostly used when resolving sub queries.
range
key column indicates which index is used.
The key_len contains the longest key part that was used.
The ref column will be NULL for this type.
range can be used for when an key column is compared to a
constant with =, <>, >, >=, <,
<=, IS NULL, <=>, BETWEEN and IN.
SELECT * FROM range_table WHERE key_column = 10; SELECT * FROM range_table WHERE key_column BETWEEN 10 and 20; SELECT * FROM range_table WHERE key_column IN (10,20,30); SELECT * FROM range_table WHERE key_part1= 10 and key_part2 IN (10,20,30);
index
ALL, except that only the index tree is
scanned. This is usually faster than ALL, as the index file is usually
smaller than the datafile.
This can be used when the query only uses columns that are part of one index.
ALL
const, and usually very bad in all other
cases. You normally can avoid ALL by adding more indexes, so that
the row can be retrieved based on constant values or column values from
earlier tables.
possible_keys
possible_keys column indicates which indexes MySQL
could use to find the rows in this table. Note that this column is
totally independent of the order of the tables. That means that some of
the keys in possible_keys may not be usable in practice with the
generated table order.
If this column is empty, there are no relevant indexes. In this case,
you may be able to improve the performance of your query by examining
the WHERE clause to see if it refers to some column or columns
that would be suitable for indexing. If so, create an appropriate index
and check the query with EXPLAIN again. See section 6.5.4 ALTER TABLE Syntax.
To see what indexes a table has, use SHOW INDEX FROM tbl_name.
key
key column indicates the key (index) that MySQL actually
decided to use. The key is NULL if no index was chosen. To force
MySQL to use an key listed in the possible_keys column, use
USE KEY/IGNORE KEY in your query.
See section 6.4.1 SELECT Syntax.
Also, running myisamchk --analyze (see section 4.4.6.1 myisamchk Invocation Syntax) or ANALYZE TABLE
(see section 4.5.2 ANALYZE TABLE Syntax) on the table will help the
optimiser choose better indexes.
key_len
key_len column indicates the length of the key that
MySQL decided to use. The length is NULL if the
key is NULL. Note that this tells us how many parts of a
multi-part key MySQL will actually use.
ref
ref column shows which columns or constants are used with the
key to select rows from the table.
rows
rows column indicates the number of rows MySQL
believes it must examine to execute the query.
Extra
Distinct
Not exists
LEFT JOIN optimisation on the
query and will not examine more rows in this table for the previous row
combination after it finds one row that matches the LEFT JOIN criteria.
Here is an example for this:
SELECT * FROM t1 LEFT JOIN t2 ON t1.id=t2.id WHERE t2.id IS NULL;Assume that
t2.id is defined with NOT NULL. In this case
MySQL will scan t1 and look up the rows in t2
through t1.id. If MySQL finds a matching row in
t2, it knows that t2.id can never be NULL, and will
not scan through the rest of the rows in t2 that has the same
id. In other words, for each row in t1, MySQL
only needs to do a single lookup in t2, independent of how many
matching rows there are in t2.
range checked for each record (index map: #)Using filesort
join type and storing the sort key + pointer to
the row for all rows that match the WHERE. Then the keys are
sorted. Finally the rows are retrieved in sorted order.
Using index
Using temporary
ORDER BY on a different column set than you did a GROUP
BY on.
Using where
WHERE clause will be used to restrict which rows will be
matched against the next table or sent to the client. If you don't have
this information and the table is of type ALL or index,
you may have something wrong in your query (if you don't intend to
fetch/examine all rows from the table).
Using filesort and Using temporary.
You can get a good indication of how good a join is by multiplying all values
in the rows column of the EXPLAIN output. This should tell you
roughly how many rows MySQL must examine to execute the query. This
number is also used when you restrict queries with the max_join_size
variable.
See section 5.5.2 Tuning Server Parameters.
The following example shows how a JOIN can be optimised progressively
using the information provided by EXPLAIN.
Suppose you have the SELECT statement shown here, that you examine
using EXPLAIN:
EXPLAIN SELECT tt.TicketNumber, tt.TimeIn,
tt.ProjectReference, tt.EstimatedShipDate,
tt.ActualShipDate, tt.ClientID,
tt.ServiceCodes, tt.RepetitiveID,
tt.CurrentProcess, tt.CurrentDPPerson,
tt.RecordVolume, tt.DPPrinted, et.COUNTRY,
et_1.COUNTRY, do.CUSTNAME
FROM tt, et, et AS et_1, do
WHERE tt.SubmitTime IS NULL
AND tt.ActualPC = et.EMPLOYID
AND tt.AssignedPC = et_1.EMPLOYID
AND tt.ClientID = do.CUSTNMBR;
For this example, assume that:
| Table | Column | Column type |
tt | ActualPC | CHAR(10)
|
tt | AssignedPC | CHAR(10)
|
tt | ClientID | CHAR(10)
|
et | EMPLOYID | CHAR(15)
|
do | CUSTNMBR | CHAR(15)
|
| Table | Index |
tt | ActualPC
|
tt | AssignedPC
|
tt | ClientID
|
et | EMPLOYID (primary key)
|
do | CUSTNMBR (primary key)
|
tt.ActualPC values aren't evenly distributed.
Initially, before any optimisations have been performed, the EXPLAIN
statement produces the following information:
table type possible_keys key key_len ref rows Extra
et ALL PRIMARY NULL NULL NULL 74
do ALL PRIMARY NULL NULL NULL 2135
et_1 ALL PRIMARY NULL NULL NULL 74
tt ALL AssignedPC,ClientID,ActualPC NULL NULL NULL 3872
range checked for each record (key map: 35)
Because type is ALL for each table, this output indicates that
MySQL is doing a full join for all tables! This will take quite a
long time, as the product of the number of rows in each table must be
examined! For the case at hand, this is 74 * 2135 * 74 * 3872 =
45,268,558,720 rows. If the tables were bigger, you can only imagine how
long it would take.
One problem here is that MySQL can't (yet) use indexes on columns
efficiently if they are declared differently. In this context,
VARCHAR and CHAR are the same unless they are declared as
different lengths. Because tt.ActualPC is declared as CHAR(10)
and et.EMPLOYID is declared as CHAR(15), there is a length
mismatch.
To fix this disparity between column lengths, use ALTER TABLE to
lengthen ActualPC from 10 characters to 15 characters:
mysql> ALTER TABLE tt MODIFY ActualPC VARCHAR(15);
Now tt.ActualPC and et.EMPLOYID are both VARCHAR(15).
Executing the EXPLAIN statement again produces this result:
table type possible_keys key key_len ref rows Extra
tt ALL AssignedPC,ClientID,ActualPC NULL NULL NULL 3872 Using where
do ALL PRIMARY NULL NULL NULL 2135
range checked for each record (key map: 1)
et_1 ALL PRIMARY NULL NULL NULL 74
range checked for each record (key map: 1)
et eq_ref PRIMARY PRIMARY 15 tt.ActualPC 1
This is not perfect, but is much better (the product of the rows
values is now less by a factor of 74). This version is executed in a couple
of seconds.
A second alteration can be made to eliminate the column length mismatches
for the tt.AssignedPC = et_1.EMPLOYID and tt.ClientID =
do.CUSTNMBR comparisons:
mysql> ALTER TABLE tt MODIFY AssignedPC VARCHAR(15),
-> MODIFY ClientID VARCHAR(15);
Now EXPLAIN produces the output shown here:
table type possible_keys key key_len ref rows Extra
et ALL PRIMARY NULL NULL NULL 74
tt ref AssignedPC, ActualPC 15 et.EMPLOYID 52 Using where
ClientID,
ActualPC
et_1 eq_ref PRIMARY PRIMARY 15 tt.AssignedPC 1
do eq_ref PRIMARY PRIMARY 15 tt.ClientID 1
This is almost as good as it can get.
The remaining problem is that, by default, MySQL assumes that values
in the tt.ActualPC column are evenly distributed, and that isn't the
case for the tt table. Fortunately, it is easy to tell MySQL
about this:
shell> myisamchk --analyze PATH_TO_MYSQL_DATABASE/tt shell> mysqladmin refresh
Now the join is perfect, and EXPLAIN produces this result:
table type possible_keys key key_len ref rows Extra
tt ALL AssignedPC NULL NULL NULL 3872 Using where
ClientID,
ActualPC
et eq_ref PRIMARY PRIMARY 15 tt.ActualPC 1
et_1 eq_ref PRIMARY PRIMARY 15 tt.AssignedPC 1
do eq_ref PRIMARY PRIMARY 15 tt.ClientID 1
Note that the rows column in the output from EXPLAIN is an
educated guess from the MySQL join optimiser. To optimise a
query, you should check if the numbers are even close to the truth. If not,
you may get better performance by using STRAIGHT_JOIN in your
SELECT statement and trying to list the tables in a different order in
the FROM clause.
In most cases you can estimate the performance by counting disk seeks.
For small tables, you can usually find the row in 1 disk seek (as the
index is probably cached). For bigger tables, you can estimate that
(using B++ tree indexes) you will need: log(row_count) /
log(index_block_length / 3 * 2 / (index_length + data_pointer_length)) +
1 seeks to find a row.
In MySQL an index block is usually 1024 bytes and the data
pointer is usually 4 bytes. A 500,000 row table with an
index length of 3 (medium integer) gives you:
log(500,000)/log(1024/3*2/(3+4)) + 1 = 4 seeks.
As the above index would require about 500,000 * 7 * 3/2 = 5.2M, (assuming that the index buffers are filled to 2/3, which is typical) you will probably have much of the index in memory and you will probably only need 1-2 calls to read data from the OS to find the row.
For writes, however, you will need 4 seek requests (as above) to find where to place the new index and normally 2 seeks to update the index and write the row.
Note that the above doesn't mean that your application will slowly degenerate by log N! As long as everything is cached by the OS or SQL server things will only go marginally slower while the table gets bigger. After the data gets too big to be cached, things will start to go much slower until your applications is only bound by disk-seeks (which increase by log N). To avoid this, increase the index cache as the data grows. See section 5.5.2 Tuning Server Parameters.
SELECT Queries
In general, when you want to make a slow SELECT ... WHERE faster, the
first thing to check is whether you can add an index. See section 5.4.3 How MySQL Uses Indexes. All references between different tables
should usually be done with indexes. You can use the EXPLAIN command
to determine which indexes are used for a SELECT.
See section 5.2.1 EXPLAIN Syntax (Get Information About a SELECT).
Some general tips:
myisamchk
--analyze on a table after it has been loaded with relevant data. This
updates a value for each index part that indicates the average number of
rows that have the same value. (For unique indexes, this is always 1,
of course.) MySQL will use this to decide which index to
choose when you connect two tables with 'a non-constant expression'.
You can check the result from the analyze run by doing SHOW
INDEX FROM table_name and examining the Cardinality column.
myisamchk
--sort-index --sort-records=1 (if you want to sort on index 1). If you
have a unique index from which you want to read all records in order
according to that index, this is a good way to make that faster. Note,
however, that this sorting isn't written optimally and will take a long
time for a large table!
WHERE Clauses
The WHERE optimisations are put in the SELECT part here because
they are mostly used with SELECT, but the same optimisations apply for
WHERE in DELETE and UPDATE statements.
Also note that this section is incomplete. MySQL does many optimisations, and we have not had time to document them all.
Some of the optimisations performed by MySQL are listed here:
((a AND b) AND c OR (((a AND b) AND (c AND d)))) -> (a AND b AND c) OR (a AND b AND c AND d)
(a<b AND b=c) AND a=5 -> b>5 AND b=c AND a=5
(B>=5 AND B=5) OR (B=6 AND 5=5) OR (B=7 AND 5=6) -> B=5 OR B=6
COUNT(*) on a single table without a WHERE is retrieved
directly from the table information for MyISAM and HEAP tables.
This is also done for any NOT NULL expression when used with only one
table.
SELECT statements are impossible and returns no rows.
HAVING is merged with WHERE if you don't use GROUP BY
or group functions (COUNT(), MIN()...).
WHERE is constructed to get a fast
WHERE evaluation for each sub-join and also to skip records as
soon as possible.
WHERE clause on a UNIQUE
index, or a PRIMARY KEY, where all index parts are used with constant
expressions and the index parts are defined as NOT NULL.
mysql> SELECT * FROM t WHERE primary_key=1;
mysql> SELECT * FROM t1,t2
-> WHERE t1.primary_key=1 AND t2.primary_key=t1.id;
ORDER BY and in GROUP
BY come from the same table, then this table is preferred first when
joining.
ORDER BY clause and a different GROUP BY
clause, or if the ORDER BY or GROUP BY contains columns
from tables other than the first table in the join queue, a temporary
table is created.
SQL_SMALL_RESULT, MySQL will use an in-memory
temporary table.
HAVING clause
are skipped.
Some examples of queries that are very fast:
mysql> SELECT COUNT(*) FROM tbl_name;
mysql> SELECT MIN(key_part1),MAX(key_part1) FROM tbl_name;
mysql> SELECT MAX(key_part2) FROM tbl_name
-> WHERE key_part_1=constant;
mysql> SELECT ... FROM tbl_name
-> ORDER BY key_part1,key_part2,... LIMIT 10;
mysql> SELECT ... FROM tbl_name
-> ORDER BY key_part1 DESC,key_part2 DESC,... LIMIT 10;
The following queries are resolved using only the index tree (assuming the indexed columns are numeric):
mysql> SELECT key_part1,key_part2 FROM tbl_name WHERE key_part1=val;
mysql> SELECT COUNT(*) FROM tbl_name
-> WHERE key_part1=val1 AND key_part2=val2;
mysql> SELECT key_part2 FROM tbl_name GROUP BY key_part1;
The following queries use indexing to retrieve the rows in sorted order without a separate sorting pass:
mysql> SELECT ... FROM tbl_name
-> ORDER BY key_part1,key_part2,... ;
mysql> SELECT ... FROM tbl_name
-> ORDER BY key_part1 DESC,key_part2 DESC,... ;
IS NULL
MySQL can do the same optimization on column IS NULL as it can do
with column = constant_value. For example, MySQL can use
indexes and ranges to search for NULL with IS NULL.
SELECT * FROM table_name WHERE key_col IS NULL; SELECT * FROM table_name WHERE key_col <=> NULL; SELECT * FROM table_name WHERE key_col=# OR key_col=# OR key_col IS NULL
If you use column_name IS NULL on a NOT NULL in a WHERE clause
on table that is not used OUTER JOIN that expression will be optimised
away.
MySQL 4.1.1 can additionally optimise the combination column =
expr AND column IS NULL, an form that is common in resolved sub
queries. EXPLAIN will show ref_or_null when this
optimization is used.
This optimization can handle one IS NULL for any key part.
Some examples of queries that are optimised (assuming key on t2 (a,b)):
SELECT * FROM t1 WHERE t1.a=expr OR t1.a IS NULL; SELECT * FROM t1,t2 WHERE t1.a=t2.a OR t2.a IS NULL; SELECT * FROM t1,t2 WHERE (t1.a=t2.a OR t2.a IS NULL) AND t2.b=t1.b; SELECT * FROM t1,t2 WHERE t1.a=t2.a AND (t2.b=t1.b OR t2.b IS NULL); SELECT * FROM t1,t2 WHERE (t1.a=t2.a AND t2.a IS NULL AND ...) OR (t1.a=t2.a AND t2.a IS NULL AND ...);
ref_or_null works by first doing a read on the reference key
and after that a separate search after rows with NULL key.
Note that the optimization can only handle one IS NULL level.
SELECT * FROM t1,t2 where (t1.a=t2.a AND t2.a IS NULL) OR (t1.b=t2.b AND t2.b IS NULL);
Int the above case MySQL will only use key lookups on the part
(t1.a=t2.a AND t2.a IS NULL) and not be able to use the key part on
b.
DISTINCT
DISTINCT is converted to a GROUP BY on all columns,
DISTINCT combined with ORDER BY will in many cases also
need a temporary table.
When combining LIMIT # with DISTINCT, MySQL will stop
as soon as it finds # unique rows.
If you don't use columns from all used tables, MySQL will stop the scanning of the not used tables as soon as it has found the first match.
SELECT DISTINCT t1.a FROM t1,t2 where t1.a=t2.a;
In the case, assuming t1 is used before t2 (check with
EXPLAIN), then MySQL will stop reading from t2 (for that
particular row in t1) when the first row in t2 is found.
LEFT JOIN and RIGHT JOIN
A LEFT JOIN B join_condition in MySQL is implemented as follows:
B is set to be dependent on table A and all tables
that A is dependent on.
A is set to be dependent on all tables (except B)
that are used in the LEFT JOIN condition.
LEFT JOIN condition is used to decide how we should retrieve rows
from table B. (In other words, any condition in the WHERE clause
is not used).
WHERE optimisations are done.
A that matches the WHERE clause, but there
wasn't any row in B that matched the ON condition,
then an extra B row is generated with all columns set to NULL.
LEFT JOIN to find rows that don't exist in some
table and you have the following test: column_name IS NULL in the
WHERE part, where column_name is a column that is declared as
NOT NULL, then MySQL will stop searching after more rows
(for a particular key combination) after it has found one row that
matches the LEFT JOIN condition.
RIGHT JOIN is implemented analogously as LEFT JOIN.
The table read order forced by LEFT JOIN and STRAIGHT JOIN
will help the join optimiser (which calculates in which order tables
should be joined) to do its work much more quickly, as there are fewer
table permutations to check.
Note that the above means that if you do a query of type:
SELECT * FROM a,b LEFT JOIN c ON (c.key=a.key) LEFT JOIN d (d.key=a.key)
WHERE b.key=d.key
MySQL will do a full scan on b as the LEFT JOIN will force
it to be read before d.
The fix in this case is to change the query to:
SELECT * FROM b,a LEFT JOIN c ON (c.key=a.key) LEFT JOIN d (d.key=a.key)
WHERE b.key=d.key
Starting from 4.0.14 MySQL does the following left join optimization:
If the WHERE condition is always be false for the generated
NULL row, the LEFT JOIN is changed to a normal join.
For example, in the following query the WHERE clause would be
false if t2.column would be NULL so it's safe to convert to
a normal join.
SELECT * FROM t1 LEFT t2 ON (column) WHERE t2.column2 =5; -> SELECT * FROM t1,t2 WHERE t2.column2=5 AND t1.column=t2.column;
this can be made faster as MySQL can now use table t2 before
table t1 if this would result in a better query plan. To force a
specific table order one should use STRAIGHT JOIN.
ORDER BY
In some cases MySQL can uses index to satisfy an ORDER BY or
GROUP BY request without doing any extra sorting.
The index can also be used even if the ORDER BY doesn't match the
index exactly, as long as all the unused index parts and all the extra
are ORDER BY columns are constants in the WHERE
clause. The following queries will use the index to resolve the
ORDER BY / GROUP BY part:
SELECT * FROM t1 ORDER BY key_part1,key_part2,... SELECT * FROM t1 WHERE key_part1=constant ORDER BY key_part2 SELECT * FROM t1 WHERE key_part1=constant GROUP BY key_part2 SELECT * FROM t1 ORDER BY key_part1 DESC,key_part2 DESC SELECT * FROM t1 WHERE key_part1=1 ORDER BY key_part1 DESC,key_part2 DESC
Some cases where MySQL can not use indexes to resolve the ORDER
BY: (Note that MySQL will still use indexes to find the rows that
matches the WHERE clause):
ORDER BY on different keys:
SELECT * FROM t1 ORDER BY key1,key2
ORDER BY using non-consecutive key parts.
SELECT * FROM t1 WHERE key2=constant ORDER BY key_part2
ASC and DESC.
SELECT * FROM t1 ORDER BY key_part1 DESC,key_part2 ASC
ORDER BY:
SELECT * FROM t1 WHERE key2=constant ORDER BY key1
ORDER
BY on are not all from the first not-const table that is used to
retrieve rows (This is the first table in the EXPLAIN output which
doesn't use a const row fetch method).
ORDER BY and GROUP BY expressions.
HASH index in HEAP tables).
In the cases where MySQL have to sort the result, it uses the following algorithm:
WHERE clause are skipped.
sort_buffer).
MERGEBUFF (7) regions to one block in
another temporary file. Repeat until all blocks from the first file
are in the second file.
MERGEBUFF2 (15)
blocks left.
record_rnd_buffer) .
You can with EXPLAIN SELECT ... ORDER BY check if MySQL can use
indexes to resolve the query. If you get Using filesort in the
extra column, then MySQL can't use indexes to resolve the
ORDER BY. See section 5.2.1 EXPLAIN Syntax (Get Information About a SELECT).
If you want to have a higher ORDER BY speed, you should first
see if you can get MySQL to use indexes instead of having to do an extra
sorting phase. If this is not possible, then you can do:
sort_buffer variable.
record_rnd_buffer variable.
tmpdir to point to a dedicated disk with lots of empty space.
If you use MySQL 4.1 or later you can spread load between
several physical disks by setting tmpdir to a list of paths
separated by colon : (semicolon ; on Windows). They
will be used in round-robin fashion.
Note: These paths should end up on different physical disks,
not different partitions of the same disk.
MySQL by default sorts all GROUP BY x,y[,...] queries as if you
would have specified ORDER BY x,y[,...]. MySQL will optimise
away any ORDER BY as above without any speed penalty. If you by
in some cases don't want to have the result sorted you can specify
ORDER BY NULL:
INSERT INTO foo SELECT a,COUNT(*) FROM bar GROUP BY a ORDER BY NULL;
LIMIT
In some cases MySQL will handle the query differently when you are
using LIMIT # and not using HAVING:
LIMIT, MySQL
will use indexes in some cases when it normally would prefer to do a
full table scan.
LIMIT # with ORDER BY, MySQL will end the
sorting as soon as it has found the first # lines instead of sorting
the whole table.
LIMIT # with DISTINCT, MySQL will stop
as soon as it finds # unique rows.
GROUP BY can be resolved by reading the key in order
(or do a sort on the key) and then calculate summaries until the
key value changes. In this case LIMIT # will not calculate any
unnecessary GROUP BYs.
# rows to the client, it
will abort the query (if you are not using SQL_CALC_FOUND_ROWS).
LIMIT 0 will always quickly return an empty set. This is useful
to check the query and to get the column types of the result columns.
LIMIT # is used to calculate how much space is required.
INSERT QueriesThe time to insert a record consists approximately of:
where the numbers are somewhat proportional to the overall time. This does not take into consideration the initial overhead to open tables (which is done once for each concurrently running query).
The size of the table slows down the insertion of indexes by log N (B-trees).
Some ways to speed up inserts:
INSERT statements. This is much faster (many times
in some cases) than using separate INSERT statements. If you are adding
data to non-empty table, you may tune up the bulk_insert_buffer_size
variable to make it even faster.
See section 4.5.7.4 SHOW VARIABLES.
INSERT DELAYED statement. See section 6.4.3 INSERT Syntax.
MyISAM tables you can insert rows at the same time
SELECTs are running if there are no deleted rows in the tables.
LOAD DATA INFILE. This
is usually 20 times faster than using a lot of INSERT statements.
See section 6.4.9 LOAD DATA INFILE Syntax.
LOAD DATA INFILE run even
faster when the table has many indexes. Use the following procedure:
CREATE TABLE. For example, using
mysql or Perl-DBI.
FLUSH TABLES statement or the shell command mysqladmin
flush-tables.
myisamchk --keys-used=0 -rq /path/to/db/tbl_name. This will
remove all usage of all indexes from the table.
LOAD DATA INFILE. This will not
update any indexes and will therefore be very fast.
myisampack
on it to make it smaller. See section 7.1.2.3 Compressed Table Characteristics.
myisamchk -r -q
/path/to/db/tbl_name. This will create the index tree in memory before
writing it to disk, which is much faster because it avoids lots of disk
seeks. The resulting index tree is also perfectly balanced.
FLUSH TABLES statement or the shell command mysqladmin
flush-tables.
LOAD DATA INFILE also does the above optimisation if
you insert into an empty table; the main difference with the above
procedure is that you can let myisamchk allocate much more temporary
memory for the index creation that you may want MySQL to allocate for
every index recreation.
Since MySQL 4.0 you can also use
ALTER TABLE tbl_name DISABLE KEYS instead of
myisamchk --keys-used=0 -rq /path/to/db/tbl_name and
ALTER TABLE tbl_name ENABLE KEYS instead of
myisamchk -r -q /path/to/db/tbl_name. This way you can also skip
FLUSH TABLES steps.
mysql> LOCK TABLES a WRITE; mysql> INSERT INTO a VALUES (1,23),(2,34),(4,33); mysql> INSERT INTO a VALUES (8,26),(6,29); mysql> UNLOCK TABLES;The main speed difference is that the index buffer is flushed to disk only once, after all
INSERT statements have completed. Normally there would
be as many index buffer flushes as there are different INSERT
statements. Locking is not needed if you can insert all rows with a single
statement.
For transactional tables, you should use BEGIN/COMMIT instead of
LOCK TABLES to get a speedup.
Locking will also lower the total time of multi-connection tests, but the
maximum wait time for some threads will go up (because they wait for
locks). For example:
thread 1 does 1000 inserts thread 2, 3, and 4 does 1 insert thread 5 does 1000 insertsIf you don't use locking, 2, 3, and 4 will finish before 1 and 5. If you use locking, 2, 3, and 4 probably will not finish before 1 or 5, but the total time should be about 40% faster. As
INSERT, UPDATE, and DELETE operations are very
fast in MySQL, you will obtain better overall performance by
adding locks around everything that does more than about 5 inserts or
updates in a row. If you do very many inserts in a row, you could do a
LOCK TABLES followed by an UNLOCK TABLES once in a while
(about each 1000 rows) to allow other threads access to the table. This
would still result in a nice performance gain.
Of course, LOAD DATA INFILE is much faster for loading data.
To get some more speed for both LOAD DATA INFILE and
INSERT, enlarge the key buffer. See section 5.5.2 Tuning Server Parameters.
UPDATE Queries
Update queries are optimised as a SELECT query with the additional
overhead of a write. The speed of the write is dependent on the size of
the data that is being updated and the number of indexes that are
updated. Indexes that are not changed will not be updated.
Also, another way to get fast updates is to delay updates and then do many updates in a row later. Doing many updates in a row is much quicker than doing one at a time if you lock the table.
Note that, with dynamic record format, updating a record to
a longer total length may split the record. So if you do this often,
it is very important to OPTIMIZE TABLE sometimes.
See section 4.5.1 OPTIMIZE TABLE Syntax.
DELETE Queries
If you want to delete all rows in the table, you should use
TRUNCATE TABLE table_name. See section 6.4.7 TRUNCATE Syntax.
The time to delete a record is exactly proportional to the number of indexes. To delete records more quickly, you can increase the size of the index cache. See section 5.5.2 Tuning Server Parameters.
Unsorted tips for faster systems:
thread_cache_size variable. See section 5.5.2 Tuning Server Parameters.
EXPLAIN
command. See section 5.2.1 EXPLAIN Syntax (Get Information About a SELECT).
SELECT queries on MyISAM tables that are
updated a lot. This is to avoid problems with table locking.
MyISAM tables can insert rows in a table without deleted
rows at the same time another table is reading from it. If this is important
for you, you should consider methods where you don't have to delete rows
or run OPTIMIZE TABLE after you have deleted a lot of rows.
ALTER TABLE ... ORDER BY expr1,expr2... if you mostly
retrieve rows in expr1,expr2... order. By using this option after big
changes to the table, you may be able to get higher performance.
SELECT * FROM table_name WHERE hash=MD5(CONCAT(col1,col2))
AND col_1='constant' AND col_2='constant'
VARCHAR
or BLOB columns. You will get dynamic row length as soon as you
are using a single VARCHAR or BLOB column. See section 7 MySQL Table Types.
UPDATE table SET count=count+1 WHERE index_column=constant
is very fast!
This is really important when you use MySQL table types like MyISAM and
ISAM that
only have table locking (multiple readers / single writers). This will
also give better performance with most databases, as the row locking
manager in this case will have less to do.
INSERT /*! DELAYED */ when you do not need to know when your
data is written. This speeds things up because many records can be written
with a single disk write.
INSERT /*! LOW_PRIORITY */ when you want your selects to be
more important.
SELECT /*! HIGH_PRIORITY */ to get selects that jump the
queue. That is, the select is done even if there is somebody waiting to
do a write.
INSERT statement to store many rows with one
SQL command (many SQL servers supports this).
LOAD DATA INFILE to load bigger amounts of data. This is
faster than normal inserts and will be even faster when myisamchk
is integrated in mysqld.
AUTO_INCREMENT columns to make unique values.
OPTIMIZE TABLE once in a while to avoid fragmentation when
using a dynamic table format. See section 4.5.1 OPTIMIZE TABLE Syntax.
HEAP tables to get more speed when possible. See section 7 MySQL Table Types.
name instead of
customer_name in the customer table). To make your names portable
to other SQL servers you should keep them shorter than 18 characters.
MyISAM directly, you could
get a speed increase of 2-5 times compared to using the SQL interface.
To be able to do this the data must be on the same server as
the application, and usually it should only be accessed by one process
(because external file locking is really slow). One could eliminate the
above problems by introducing low-level MyISAM commands in the
MySQL server (this could be one easy way to get more
performance if needed). By carefully designing the database interface,
it should be quite easy to support this types of optimisation.
DELAY_KEY_WRITE=1 will make the updating of
indexes faster, as these are not logged to disk until the file is closed.
The downside is that you should run myisamchk on these tables before
you start mysqld to ensure that they are okay if something killed
mysqld in the middle. As the key information can always be generated
from the data, you should not lose anything by using DELAY_KEY_WRITE.
You can find a discussion about different locking methods in the appendix. See section E.4 Locking methods.
All locking in MySQL is deadlock-free, except for InnoDB and
BDB type tables.
This is managed by always
requesting all needed locks at once at the beginning of a query and always
locking the tables in the same order.
InnoDB type tables automatically acquire their row locks and
BDB type tables
their page locks during the processing of SQL statements, not at the start
of the transaction.
The locking method MySQL uses for WRITE locks works as follows:
The locking method MySQL uses for READ locks works as follows:
When a lock is released, the lock is made available to the threads in the write lock queue, then to the threads in the read lock queue.
This means that if you have many updates on a table, SELECT
statements will wait until there are no more updates.
To work around this for the case where you want to do many INSERT and
SELECT operations on a table, you can insert rows in a temporary
table and update the real table with the records from the temporary table
once in a while.
This can be done with the following code:
mysql> LOCK TABLES real_table WRITE, insert_table WRITE; mysql> INSERT INTO real_table SELECT * FROM insert_table; mysql> TRUNCATE TABLE insert_table; mysql> UNLOCK TABLES;
You can use the LOW_PRIORITY options with INSERT,
UPDATE or DELETE or HIGH_PRIORITY with
SELECT if you want to prioritise retrieval in some specific
cases. You can also start mysqld with --low-priority-updates
to get the same behaveour.
Using SQL_BUFFER_RESULT can also help making table locks shorter.
See section 6.4.1 SELECT Syntax.
You could also change the locking code in `mysys/thr_lock.c' to use a single queue. In this case, write locks and read locks would have the same priority, which might help some applications.
The table locking code in MySQL is deadlock free.
MySQL uses table locking (instead of row locking or column
locking) on all table types, except InnoDB and BDB tables,
to achieve a very
high lock speed. For large tables, table locking is much better than
row locking for most applications, but there are, of course, some
pitfalls.
For InnoDB and BDB tables, MySQL only uses table
locking if you explicitly lock the table with LOCK TABLES.
For these table types we recommend you to not use
LOCK TABLES at all, because InnoDB uses automatic
row level locking and BDB uses page level locking to
ensure transaction isolation.
In MySQL Version 3.23.7 and above, you can insert rows into
MyISAM tables at the same time other threads are reading from the
table. Note that currently this only works if there are no holes after
deleted rows in the table at the time the insert is made. When all holes
has been filled with new data, concurrent inserts will automatically be
enabled again.
Table locking enables many threads to read from a table at the same time, but if a thread wants to write to a table, it must first get exclusive access. During the update, all other threads that want to access this particular table will wait until the update is ready.
As updates on tables normally are considered to be more important than
SELECT, all statements that update a table have higher priority
than statements that retrieve information from a table. This should
ensure that updates are not 'starved' because one issues a lot of heavy
queries against a specific table. (You can change this by using
LOW_PRIORITY with the statement that does the update or
HIGH_PRIORITY with the SELECT statement.)
Starting from MySQL Version 3.23.7 one can use the
max_write_lock_count variable to force MySQL to
temporary give all SELECT statements, that wait for a table, a
higher priority after a specific number of inserts on a table.
Table locking is, however, not very good under the following senario:
SELECT that takes a long time to run.
UPDATE on a used table. This client
will wait until the SELECT is finished.
SELECT statement on the same table. As
UPDATE has higher priority than SELECT, this SELECT
will wait for the UPDATE to finish. It will also wait for the first
SELECT to finish!
full disk, in which case all
threads that wants to access the problem table will also be put in a waiting
state until more disk space is made available.
Some possible solutions to this problem are:
SELECT statements to run faster. You may have to create
some summary tables to do this.
mysqld with --low-priority-updates. This will give
all statements that update (modify) a table lower priority than a SELECT
statement. In this case the last SELECT statement in the previous
scenario would execute before the INSERT statement.
INSERT, UPDATE, or DELETE
statement lower priority with the LOW_PRIORITY attribute.
mysqld with a low value for max_write_lock_count to give
READ locks after a certain number of WRITE locks.
SET LOW_PRIORITY_UPDATES=1.
See section 5.5.6 SET Syntax.
SELECT is very important with the
HIGH_PRIORITY attribute. See section 6.4.1 SELECT Syntax.
INSERT combined with SELECT,
switch to use the new MyISAM tables as these support concurrent
SELECTs and INSERTs.
INSERT and SELECT statements, the
DELAYED attribute to INSERT will probably solve your problems.
See section 6.4.3 INSERT Syntax.
SELECT and DELETE, the LIMIT
option to DELETE may help. See section 6.4.6 DELETE Syntax.
MySQL keeps row data and index data in separate files. Many (almost all) other databases mix row and index data in the same file. We believe that the MySQL choice is better for a very wide range of modern systems.
Another way to store the row data is to keep the information for each column in a separate area (examples are SDBM and Focus). This will cause a performance hit for every query that accesses more than one column. Because this degenerates so quickly when more than one column is accessed, we believe that this model is not good for general purpose databases.
The more common case is that the index and data are stored together (like in Oracle/Sybase et al). In this case you will find the row information at the leaf page of the index. The good thing with this layout is that it, in many cases, depending on how well the index is cached, saves a disk read. The bad things with this layout are:
One of the most basic optimisation is to get your data (and indexes) to take as little space on the disk (and in memory) as possible. This can give huge improvements because disk reads are faster and normally less main memory will be used. Indexing also takes less resources if done on smaller columns.
MySQL supports a lot of different table types and row formats. Choosing the right table format may give you a big performance gain. See section 7 MySQL Table Types.
You can get better performance on a table and minimise storage space using the techniques listed here:
MEDIUMINT is often better than INT.
NOT NULL if possible. It makes everything
faster and you save one bit per column. Note that if you really need
NULL in your application you should definitely use it. Just avoid
having it on all columns by default.
VARCHAR,
TEXT, or BLOB columns), a fixed-size record format is
used. This is faster but unfortunately may waste some space.
See section 7.1.2 MyISAM Table Formats.
Indexes are used to find rows with a specific value of one column fast. Without an index MySQL has to start with the first record and then read through the whole table until it finds the relevant rows. The bigger the table, the more this costs. If the table has an index for the columns in question, MySQL can quickly get a position to seek to in the middle of the datafile without having to look at all the data. If a table has 1000 rows, this is at least 100 times faster than reading sequentially. Note that if you need to access almost all 1000 rows it is faster to read sequentially because we then avoid disk seeks.
All MySQL indexes (PRIMARY, UNIQUE, and
INDEX) are stored in B-trees. Strings are automatically prefix-
and end-space compressed. See section 6.5.7 CREATE INDEX Syntax.
Indexes are used to:
WHERE clause.
MAX() or MIN() value for a specific indexed
column. This is optimised by a preprocessor that checks if you are
using WHERE key_part_# = constant on all key parts < N. In this case
MySQL will do a single key lookup and replace the MIN()
expression with a constant. If all expressions are replaced with
constants, the query will return at once:
SELECT MIN(key_part2),MAX(key_part2) FROM table_name where key_part1=10
ORDER BY
key_part_1,key_part_2 ). The key is read in reverse order if all key
parts are followed by DESC. See section 5.2.8 How MySQL Optimises ORDER BY.
SELECT key_part3 FROM table_name WHERE key_part1=1
Suppose you issue the following SELECT statement:
mysql> SELECT * FROM tbl_name WHERE col1=val1 AND col2=val2;
If a multiple-column index exists on col1 and col2, the
appropriate rows can be fetched directly. If separate single-column
indexes exist on col1 and col2, the optimiser tries to
find the most restrictive index by deciding which index will find fewer
rows and using that index to fetch the rows.
If the table has a multiple-column index, any leftmost prefix of the
index can be used by the optimiser to find rows. For example, if you
have a three-column index on (col1,col2,col3), you have indexed
search capabilities on (col1), (col1,col2), and
(col1,col2,col3).
MySQL can't use a partial index if the columns don't form a
leftmost prefix of the index. Suppose you have the SELECT
statements shown here:
mysql> SELECT * FROM tbl_name WHERE col1=val1; mysql> SELECT * FROM tbl_name WHERE col2=val2; mysql> SELECT * FROM tbl_name WHERE col2=val2 AND col3=val3;
If an index exists on (col1,col2,col3), only the first query
shown above uses the index. The second and third queries do involve
indexed columns, but (col2) and (col2,col3) are not
leftmost prefixes of (col1,col2,col3).
MySQL also uses indexes for LIKE comparisons if the argument
to LIKE is a constant string that doesn't start with a wildcard
character. For example, the following SELECT statements use indexes:
mysql> SELECT * FROM tbl_name WHERE key_col LIKE "Patrick%"; mysql> SELECT * FROM tbl_name WHERE key_col LIKE "Pat%_ck%";
In the first statement, only rows with "Patrick" <= key_col <
"Patricl" are considered. In the second statement, only rows with
"Pat" <= key_col < "Pau" are considered.
The following SELECT statements will not use indexes:
mysql> SELECT * FROM tbl_name WHERE key_col LIKE "%Patrick%"; mysql> SELECT * FROM tbl_name WHERE key_col LIKE other_col;
In the first statement, the LIKE value begins with a wildcard
character. In the second statement, the LIKE value is not a
constant.
MySQL 4.0 does another optimisation on LIKE. If you use
... LIKE "%string%" and string is longer than 3 characters,
MySQL will use the Turbo Boyer-Moore algorithm to initialise the
pattern for the string and then use this pattern to perform the search
quicker.
Searching using column_name IS NULL will use indexes if column_name
is an index.
MySQL normally uses the index that finds the least number of rows. An
index is used for columns that you compare with the following operators:
=, >, >=, <, <=, BETWEEN, and a
LIKE with a non-wildcard prefix like 'something%'.
Any index that doesn't span all AND levels in the WHERE clause
is not used to optimise the query. In other words: To be able to use an
index, a prefix of the index must be used in every AND group.
The following WHERE clauses use indexes:
... WHERE index_part1=1 AND index_part2=2 AND other_column=3
... WHERE index=1 OR A=10 AND index=2 /* index = 1 OR index = 2 */
... WHERE index_part1='hello' AND index_part_3=5
/* optimised like "index_part1='hello'" */
... WHERE index1=1 and index2=2 or index1=3 and index3=3;
/* Can use index on index1 but not on index2 or index 3 */
These WHERE clauses do NOT use indexes:
... WHERE index_part2=1 AND index_part3=2 /* index_part_1 is not used */
... WHERE index=1 OR A=10 /* Index is not used in
both AND parts */
... WHERE index_part1=1 OR index_part2=10 /* No index spans all rows */
Note that in some cases MySQL will not use an index, even if one would be available. Some of the cases where this happens are:
LIMIT to only retrieve
part of the rows, MySQL will use an index anyway, as it can
much more quickly find the few rows to return in the result.
All MySQL column types can be indexed. Use of indexes on the
relevant columns is the best way to improve the performance of SELECT
operations.
The maximum number of keys and the maximum index length is defined per storage engine. See section 7 MySQL Table Types. You can with all storage engines have at least 16 keys and a total index length of at least 256 bytes.
For CHAR and VARCHAR columns, you can index a prefix of a
column. This is much faster and requires less disk space than indexing the
whole column. The syntax to use in the CREATE TABLE statement to
index a column prefix looks like this:
KEY index_name (col_name(length))
The example here creates an index for the first 10 characters of the
name column:
mysql> CREATE TABLE test (
-> name CHAR(200) NOT NULL,
-> KEY index_name (name(10)));
For BLOB and TEXT columns, you must index a prefix of the
column. You cannot index the entire column.
In MySQL Version 3.23.23 or later, you can also create special
FULLTEXT indexes. They are used for full-text search. Only the
MyISAM table type supports FULLTEXT indexes. They can be
created only from CHAR, VARCHAR, and TEXT columns.
Indexing always happens over the entire column and partial indexing is not
supported. See section 6.8 MySQL Full-text Search for details.
MySQL can create indexes on multiple columns. An index may
consist of up to 15 columns. (On CHAR and VARCHAR columns you
can also use a prefix of the column as a part of an index.)
A multiple-column index can be considered a sorted array containing values that are created by concatenating the values of the indexed columns.
MySQL uses multiple-column indexes in such a way that queries are
fast when you specify a known quantity for the first column of the index in a
WHERE clause, even if you don't specify values for the other columns.
Suppose a table is created using the following specification:
mysql> CREATE TABLE test (
-> id INT NOT NULL,
-> last_name CHAR(30) NOT NULL,
-> first_name CHAR(30) NOT NULL,
-> PRIMARY KEY (id),
-> INDEX name (last_name,first_name));
Then the index name is an index over last_name and
first_name. The index will be used for queries that specify
values in a known range for last_name, or for both last_name
and first_name.
Therefore, the name index will be used in the following queries:
mysql> SELECT * FROM test WHERE last_name="Widenius";
mysql> SELECT * FROM test WHERE last_name="Widenius"
-> AND first_name="Michael";
mysql> SELECT * FROM test WHERE last_name="Widenius"
-> AND (first_name="Michael" OR first_name="Monty");
mysql> SELECT * FROM test WHERE last_name="Widenius"
-> AND first_name >="M" AND first_name < "N";
However, the name index will NOT be used in the following queries:
mysql> SELECT * FROM test WHERE first_name="Michael";
mysql> SELECT * FROM test WHERE last_name="Widenius"
-> OR first_name="Michael";
For more information on the manner in which MySQL uses indexes to improve query performance, see section 5.4.3 How MySQL Uses Indexes.
When you run mysqladmin status, you'll see something like this:
Uptime: 426 Running threads: 1 Questions: 11082 Reloads: 1 Open tables: 12
This can be somewhat perplexing if you only have 6 tables.
MySQL is multi-threaded, so it may have many queries on the same table
simultaneously. To minimise the problem with two threads having
different states on the same file, the table is opened independently by
each concurrent thread. This takes some memory but will normaly increase
performance. With ISAM and MyISAM tables this also requires
one extra file descriptor for the datafile. With these table types the index
file descriptor is shared between all threads.
You can read more about this topic in the next section. See section 5.4.7 How MySQL Opens and Closes Tables.
table_cache, max_connections, and max_tmp_tables
affect the maximum number of files the server keeps open. If you
increase one or both of these values, you may run up against a limit
imposed by your operating system on the per-process number of open file
descriptors. However, you can increase the limit on many systems.
Consult your OS documentation to find out how to do this, because the
method for changing the limit varies widely from system to system.
table_cache is related to max_connections. For example,
for 200 concurrent running connections, you should have a table cache of
at least 200 * n, where n is the maximum number of tables
in a join. You also need to reserve some extra file descriptors for
temporary tables and files.
Make sure that your operating system can handle the number of open file
descriptors implied by the table_cache setting. If
table_cache is set too high, MySQL may run out of file
descriptors and refuse connections, fail to perform queries, and be very
unreliable. You also have to take into account that the MyISAM storage
engine needs two file descriptors for each unique open table. You can
in increase the number of file descriptors available for MySQL with
the --open-files-limit=# startup option. See section A.2.17 File Not Found.
The cache of open tables will be keept at a level of table_cache
entries (default 64; this can be changed with the -O
table_cache=# option to mysqld). Note that in MySQL may
temporarly open even more tables to be able to execute queries.
A not used table is closed and removed from the table cache under the following circumstances:
table_cache entries and
a thread is no longer using a table.
mysqladmin refresh or
mysqladmin flush-tables.
FLUSH TABLES statement.
When the table cache fills up, the server uses the following procedure to locate a cache entry to use:
A table is opened for each concurrent access. This means that
if you have two threads accessing the same table or access the table
twice in the same query (with AS) the table needs to be opened twice.
The first open of any table takes two file descriptors; each additional
use of the table takes only one file descriptor. The extra descriptor
for the first open is used for the index file; this descriptor is shared
among all threads.
If you are opening a table with the HANDLER table_name OPEN
statement, a dedicated table object is allocated for the thread.
This table object is not shared by other threads an will not be closed
until the thread calls HANDLER table_name CLOSE or the thread dies.
See section 6.4.2 HANDLER Syntax. When this happens, the table is put
back in the table cache (if it isn't full).
You can check if your table cache is too small by checking the mysqld
variable Opened_tables. If this is quite big, even if you
haven't done a lot of FLUSH TABLES, you should increase your table
cache. See section 4.5.7.3 SHOW STATUS.
If you have many files in a directory, open, close, and create operations will
be slow. If you execute SELECT statements on many different tables,
there will be a little overhead when the table cache is full, because for
every table that has to be opened, another must be closed. You can reduce
this overhead by making the table cache larger.
We start with the system level things since some of these decisions have to be made very early. In other cases a fast look at this part may suffice because it not that important for the big gains. However, it is always nice to have a feeling about how much one could gain by changing things at this level.
The default OS to use is really important! To get the most use of multiple-CPU machines one should use Solaris (because the threads works really nice) or Linux (because the 2.2 kernel has really good SMP support). Also on 32-bit machines Linux has a 2G file-size limit by default. Hopefully this will be fixed soon when new filesystems are released (XFS/Reiserfs). If you have a desperate need for files bigger than 2G on Linux-intel 32 bit, you should get the LFS patch for the ext2 filesystem.
Because we have not run MySQL in production on that many platforms, we advice you to test your intended platform before choosing it, if possible.
--skip-external-locking MySQL option to avoid external
locking. Note that this will not impact MySQL's functionality as
long as you only run one server. Just remember to take down the server (or
lock relevant parts) before you run myisamchk. On some system
this switch is mandatory because the external locking does not work in any
case.
The --skip-external-locking option is on by default when compiling with
MIT-pthreads, because flock() isn't fully supported by
MIT-pthreads on all platforms. It's also on default for Linux
as Linux file locking are not yet safe.
The only case when you can't use --skip-external-locking is if you run
multiple MySQL servers (not clients) on the same data,
or run myisamchk on the table without first flushing and locking
the mysqld server tables first.
You can still use LOCK TABLES/UNLOCK TABLES even if you
are using --skip-external-locking
You can get the default buffer sizes used by the mysqld server
with this command:
shell> mysqld --help
This command produces a list of all mysqld options and configurable
variables. The output includes the default values and looks something
like this:
Possible variables for option --set-variable (-O) are: back_log current value: 5 bdb_cache_size current value: 1048540 binlog_cache_size current value: 32768 connect_timeout current value: 5 delayed_insert_timeout current value: 300 delayed_insert_limit current value: 100 delayed_queue_size current value: 1000 flush_time current value: 0 interactive_timeout current value: 28800 join_buffer_size current value: 131072 key_buffer_size current value: 1048540 lower_case_table_names current value: 0 long_query_time current value: 10 max_allowed_packet current value: 1048576 max_binlog_cache_size current value: 4294967295 max_connections current value: 100 max_connect_errors current value: 10 max_delayed_threads current value: 20 max_heap_table_size current value: 16777216 max_join_size current value: 4294967295 max_sort_length current value: 1024 max_tmp_tables current value: 32 max_write_lock_count current value: 4294967295 myisam_sort_buffer_size current value: 8388608 net_buffer_length current value: 16384 net_retry_count current value: 10 net_read_timeout current value: 30 net_write_timeout current value: 60 read_buffer_size current value: 131072 record_rnd_buffer_size current value: 131072 slow_launch_time current value: 2 sort_buffer current value: 2097116 table_cache current value: 64 thread_concurrency current value: 10 tmp_table_size current value: 1048576 thread_stack current value: 131072 wait_timeout current value: 28800
Please note that --set-variable is deprecated since MySQL 4.0,
just use --var=option on its own.
If there is a mysqld server currently running, you can see what
values it actually is using for the variables by executing this command:
shell> mysqladmin variables
You can find a full description for all variables in the SHOW VARIABLES
section in this manual. See section 4.5.7.4 SHOW VARIABLES.
You can also see some statistics from a running server by issuing the command
SHOW STATUS. See section 4.5.7.3 SHOW STATUS.
MySQL uses algorithms that are very scalable, so you can usually run with very little memory. If you, however, give MySQL more memory, you will normally also get better performance.
When tuning a MySQL server, the two most important variables to use
are key_buffer_size and table_cache. You should first feel
confident that you have these right before trying to change any of the
other variables.
If you have much memory (>=256M) and many tables and want maximum performance with a moderate number of clients, you should use something like this:
shell> mysqld_safe -O key_buffer=64M -O table_cache=256 \
-O sort_buffer=4M -O read_buffer_size=1M &
If you have only 128M and only a few tables, but you still do a lot of sorting, you can use something like:
shell> mysqld_safe -O key_buffer=16M -O sort_buffer=1M
If you have little memory and lots of connections, use something like this:
shell> mysqld_safe -O key_buffer=512k -O sort_buffer=100k \
-O read_buffer_size=100k &
or even:
shell> mysqld_safe -O key_buffer=512k -O sort_buffer=16k \
-O table_cache=32 -O read_buffer_size=8k -O net_buffer_length=1K &
If you are doing a GROUP BY or ORDER BY on files that are
much bigger than your available memory you should increase the value of
record_rnd_buffer to speed up the reading of rows after the sorting
is done.
When you have installed MySQL, the `support-files' directory will contain some different `my.cnf' example files, `my-huge.cnf', `my-large.cnf', `my-medium.cnf', and `my-small.cnf', you can use as a base to optimise your system.
If there are very many connections, ``swapping problems'' may occur unless
mysqld has been configured to use very little memory for each
connection. mysqld performs better if you have enough memory for all
connections, of course.
Note that if you change an option to mysqld, it remains in effect only
for that instance of the server.
To see the effects of a parameter change, do something like this:
shell> mysqld -O key_buffer=32m --help
Make sure that the --help option is last; otherwise, the effect of any
options listed after it on the command-line will not be reflected in the
output.
Most of the following tests are done on Linux with the MySQL benchmarks, but they should give some indication for other operating systems and workloads.
You get the fastest executable when you link with -static.
On Linux, you will get the fastest code when compiling with pgcc
and -O3. To compile `sql_yacc.cc' with these options, you
need about 200M memory because gcc/pgcc needs a lot of memory to
make all functions inline. You should also set CXX=gcc when
configuring MySQL to avoid inclusion of the libstdc++
library (it is not needed). Note that with some versions of pgcc,
the resulting code will only run on true Pentium processors, even if you
use the compiler option that you want the resulting code to be working on
all x586 type processors (like AMD).
By just using a better compiler and/or better compiler options you can get a 10-30% speed increase in your application. This is particularly important if you compile the SQL server yourself!
We have tested both the Cygnus CodeFusion and Fujitsu compilers, but when we tested them, neither was sufficiently bug free to allow MySQL to be compiled with optimisations on.
When you compile MySQL you should only include support for the
character sets that you are going to use. (Option --with-charset=xxx.)
The standard MySQL binary distributions are compiled with support
for all character sets.
Here is a list of some measurements that we have done:
pgcc and compile everything with -O6, the
mysqld server is 1% faster than with gcc 2.95.2.
-static), the result is 13%
slower on Linux. Note that you still can use a dynamic linked
MySQL library. It is only the server that is critical for
performance.
mysqld binary with strip libexec/mysqld,
the resulting binary can be up to 4% faster.
localhost,
MySQL will, by default, use sockets.)
--with-debug=full, then you will lose 20%
for most queries, but some queries may take substantially longer (The
MySQL benchmarks ran 35% slower)
If you use --with-debug, then you will only lose 15%.
By starting a mysqld version compiled with --with-debug=full
with --skip-safemalloc the end result should be close to when
configuring with --with-debug.
gcc 3.2
gcc 2.95.2 for UltraSPARC with the option
-mcpu=v8 -Wa,-xarch=v8plusa gives 4% more performance.
--log-bin makes mysqld 1% slower.
-fomit-frame-pointer or -fomit-frame-pointer -ffixed-ebp
makes mysqld 1-4% faster.
The MySQL-Linux distribution provided by MySQL AB used
to be compiled with pgcc, but we had to go back to regular gcc
because of a bug in pgcc that would generate the code that does
not run on AMD. We will continue using gcc until that bug is resolved.
In the meantime, if you have a non-AMD machine, you can get a faster
binary by compiling with pgcc. The standard MySQL
Linux binary is linked statically to get it faster and more portable.
The following list indicates some of the ways that the mysqld server
uses memory. Where applicable, the name of the server variable relevant
to the memory use is given:
key_buffer_size) is shared by all
threads; other buffers used by the server are allocated as
needed. See section 5.5.2 Tuning Server Parameters.
thread_stack), a connection buffer (variable
net_buffer_length), and a result buffer (variable
net_buffer_length). The connection buffer and result buffer are
dynamically enlarged up to max_allowed_packet when needed. When
a query is running, a copy of the current query string is also allocated.
ISAM / MyISAM tables are memory mapped. This
is because the 32-bit memory space of 4 GB is not large enough for most
big tables. When systems with a 64-bit address space become more
common we may add general support for memory mapping.
record_buffer).
record_rnd_buffer).
HEAP)
tables. Temporary tables with a big record length (calculated as the
sum of all column lengths) or that contain BLOB columns are
stored on disk.
One problem in MySQL versions before Version 3.23.2 is that if a HEAP
table exceeds the size of tmp_table_size, you get the error The
table tbl_name is full. In newer versions this is handled by
automatically changing the in-memory (HEAP) table to a disk-based
(MyISAM) table as necessary. To work around this problem, you can
increase the temporary table size by setting the tmp_table_size
option to mysqld, or by setting the SQL option
BIG_TABLES in the client program. See section 5.5.6 SET Syntax. In MySQL Version 3.20, the maximum size of the
temporary table was record_buffer*16, so if you are using this
version, you have to increase the value of record_buffer. You can
also start mysqld with the --big-tables option to always
store temporary tables on disk. However, this will affect the speed of
many complicated queries.
malloc() and
free()).
3 * n is
allocated (where n is the maximum row length, not counting BLOB
columns). A BLOB uses 5 to 8 bytes plus the length of the BLOB
data. The ISAM/MyISAM storage engines will use one extra row
buffer for internal usage.
BLOB columns, a buffer is enlarged dynamically
to read in larger BLOB values. If you scan a table, a buffer as large
as the largest BLOB value is allocated.
mysqladmin flush-tables command closes all tables that are not in
use and marks all in-use tables to be closed when the currently executing
thread finishes. This will effectively free most in-use memory.
ps and other system status programs may report that mysqld
uses a lot of memory. This may be caused by thread-stacks on different
memory addresses. For example, the Solaris version of ps counts
the unused memory between stacks as used memory. You can verify this by
checking available swap with swap -s. We have tested
mysqld with commercial memory-leakage detectors, so there should
be no memory leaks.
When a new thread connects to mysqld, mysqld will spawn a
new thread to handle the request. This thread will first check if the
hostname is in the hostname cache. If not the thread will call
gethostbyaddr_r() and gethostbyname_r() to resolve the
hostname.
If the operating system doesn't support the above thread-safe calls, the
thread will lock a mutex and call gethostbyaddr() and
gethostbyname() instead. Note that in this case no other thread
can resolve other hostnames that is not in the hostname cache until the
first thread is ready.
You can disable DNS host lookup by starting mysqld with
--skip-name-resolve. In this case you can however only use IP
names in the MySQL privilege tables.
If you have a very slow DNS and many hosts, you can get more performance by
either disabling DNS lookop with --skip-name-resolve or by
increasing the HOST_CACHE_SIZE define (default: 128) and recompile
mysqld.
You can disable the hostname cache with --skip-host-cache. You
can clear the hostname cache with FLUSH HOSTS or mysqladmin
flush-hosts.
If you don't want to allow connections over TCP/IP, you can do this
by starting mysqld with --skip-networking.
SET SyntaxSET [GLOBAL | SESSION] sql_variable=expression, [[GLOBAL | SESSION] sql_variable=expression...]
SET sets various options that affect the operation of the
server or your client.
The following examples shows the different syntaxes one can use to set variables:
In old MySQL versions we allowed the use of the SET OPTION syntax,
but this syntax is now deprecated.
In MySQL 4.0.3 we added the GLOBAL and SESSION options
and access to most important startup variables.
LOCAL can be used as a synonym for SESSION.
If you set several variables on the same command line, the last used
GLOBAL | SESSION mode is used.
SET sort_buffer_size=10000; SET @@local.sort_buffer_size=10000; SET GLOBAL sort_buffer_size=1000000, SESSION sort_buffer_size=1000000; SET @@sort_buffer_size=1000000; SET @@global.sort_buffer_size=1000000, @@local.sort_buffer_size=1000000;
The @@variable_name syntax is supported to make MySQL syntax
compatible with some other databases.
The different system variables one can set are described in the system variable section of this manual. See section 6.1.5 System Variables.
If you are using SESSION (the default) the option you set remains
in effect until the current session ends, or until you set the option to
a different value. If you use GLOBAL, which require the
SUPER privilege, the option is remembered and used for new
connections until the server restarts. If you want to make an option
permanent, you should set it in one of the MySQL option
files. See section 4.1.2 `my.cnf' Option Files.
To avoid wrong usage MySQL will give an error if you use SET
GLOBAL with a variable that can only be used with SET SESSION or if
you are not using SET GLOBAL with a global variable.
If you want to set a SESSION variable to the GLOBAL value or a
GLOBAL value to the MySQL default value, you can set it to
DEFAULT.
SET max_join_size=DEFAULT;
This is identical to:
SET @@session.max_join_size=@@global.max_join_size;
If you want to restrict the maximum value a startup option can be set to
with the SET command, you can specify this by using the
--maximum-variable-name command line option. See section 4.1.1 mysqld Command-line Options.
You can get a list of most variables with SHOW VARIABLES.
See section 4.5.7.4 SHOW VARIABLES. You can get the value for a specific value with
the @@[global.|local.]variable_name syntax:
SHOW VARIABLES like "max_join_size"; SHOW GLOBAL VARIABLES like "max_join_size"; SELECT @@max_join_size, @@global.max_join_size;
Here follows a description of the variables that uses a the variables
that uses a non-standard SET syntax and some of the other
variables. The other variable definitions can be found in the system
variable section, among the startup options or in the description of
SHOW VARIABLES. See section 6.1.5 System Variables. See section 4.1.1 mysqld Command-line Options. See section 4.5.7.4 SHOW VARIABLES.
CHARACTER SET character_set_name | DEFAULT
character_set_name is
cp1251_koi8, but you can easily add new mappings by editing the
`sql/convert.cc' file in the MySQL source distribution. The
default mapping can be restored by using a character_set_name value of
DEFAULT.
Note that the syntax for setting the CHARACTER SET option differs
from the syntax for setting the other options.
PASSWORD = PASSWORD('some password')
PASSWORD FOR user = PASSWORD('some password')
mysql database can do this. The user should be
given in user@hostname format, where user and hostname
are exactly as they are listed in the User and Host columns of
the mysql.user table entry. For example, if you had an entry with
User and Host fields of 'bob' and '%.loc.gov',
you would write:
mysql> SET PASSWORD FOR bob@"%.loc.gov" = PASSWORD("newpass");
Which is equivalent to:
mysql> UPDATE mysql.user SET password=PASSWORD("newpass")
-> WHERE user="bob" AND host="%.loc.gov";
SQL_AUTO_IS_NULL = 0 | 1
1 (default) then one can find the last inserted row
for a table with an AUTO_INCREMENT column with the following construct:
WHERE auto_increment_column IS NULL. This is used by some
ODBC programs like Access.
AUTOCOMMIT= 0 | 1
1 all changes to a table will be done at once. To start
a multi-command transaction, you have to use the BEGIN
statement. See section 6.7.1 BEGIN/COMMIT/ROLLBACK Syntax. If set to 0 you have to use COMMIT /
ROLLBACK to accept/revoke that transaction. See section 6.7.1 BEGIN/COMMIT/ROLLBACK Syntax. Note
that when you change from not AUTOCOMMIT mode to
AUTOCOMMIT mode, MySQL will do an automatic
COMMIT on any open transactions.
BIG_TABLES = 0 | 1
1, all temporary tables are stored on disk rather than in
memory. This will be a little slower, but you will not get the error
The table tbl_name is full for big SELECT operations that
require a large temporary table. The default value for a new connection is
0 (that is, use in-memory temporary tables).
This option was before named SQL_BIG_TABLES. In MySQL 4.0 you should
normally never need this flag as MySQL will automatically convert in memory
tables to disk based ones if need.
SQL_BIG_SELECTS = 0 | 1
0, MySQL will abort if a SELECT is attempted
that probably will take a very long time, which is defined as if the number
of examined rows is probably going to be bigger than MAX_JOIN_SIZE.
This is useful when an inadvisable WHERE statement has been
issued. A big query is defined as a SELECT that probably will
have to examine more than max_join_size rows. The default value
for a new connection is 1 (which will allow all SELECT
statements).
If you set MAX_JOIN_SIZE to another value than DEFAULT
SQL_BIG_SELECTS will be set to 0.
SQL_BUFFER_RESULT = 0 | 1
SQL_BUFFER_RESULT will force the result from SELECTs
to be put into a temporary table. This will help MySQL free the
table locks early and will help in cases where it takes a long time to
send the result set to the client.
LOW_PRIORITY_UPDATES = 0 | 1
1, all INSERT, UPDATE, DELETE, and
LOCK TABLE WRITE statements wait until there is no pending
SELECT or LOCK TABLE READ on the affected table.
This option was before named SQL_LOW_PRIORITY_UPDATES.
MAX_JOIN_SIZE = value | DEFAULT
SELECTs that will probably need to examine more than
value row combinations or is likely to do more than value
disk seeks. By setting this value, you can catch SELECTs where
keys are not used properly and that would probably take a long
time. Setting this to a value other than DEFAULT will reset the
SQL_BIG_SELECTS flag. If you set the SQL_BIG_SELECTS flag
again, the SQL_MAX_JOIN_SIZE variable will be ignored. You can
set a default value for this variable by starting mysqld with
-O max_join_size=#. This option was before named
SQL_MAX_JOIN_SIZE.
Note that if the result of the query is already in the query cache, the
above check will not be made. Instead, MySQL will send the result to the
client. Since the query result is already computed and it will not burden
the server to send the result to the client.
QUERY_CACHE_TYPE = OFF | ON | DEMAND
QUERY_CACHE_TYPE = 0 | 1 | 2
| Option | Description |
| 0 or OFF | Don't cache or retrieve results. |
| 1 or ON | Cache all results except SELECT SQL_NO_CACHE ... queries.
|
| 2 or DEMAND | Cache only SELECT SQL_CACHE ... queries.
|
SQL_SAFE_UPDATES = 0 | 1
1, MySQL will abort if an UPDATE or
DELETE is attempted that doesn't use a key or LIMIT in the
WHERE clause. This makes it possible to catch wrong updates
when creating SQL commands by hand.
SQL_SELECT_LIMIT = value | DEFAULT
SELECT statements. If
a SELECT has a LIMIT clause, the LIMIT takes precedence
over the value of SQL_SELECT_LIMIT. The default value for a new
connection is ``unlimited.'' If you have changed the limit, the default value
can be restored by using a SQL_SELECT_LIMIT value of DEFAULT.
SQL_LOG_OFF = 0 | 1
1, no logging is done to the standard log for this
client, if the client has the SUPER privilege.
SQL_LOG_BIN = 0 | 1
0, no logging is done to the binary log for the client,
if the client has the SUPER privilege.
SQL_LOG_UPDATE = 0 | 1
0, no logging is done to the update log for the client,
if the client has the SUPER privilege.
This variable is deprecated starting from version 5.0.
SQL_QUOTE_SHOW_CREATE = 0 | 1
1, SHOW CREATE TABLE will quote
table and column names. This is on by default,
for replication of tables with fancy column names to work.
section 4.5.7.8 SHOW CREATE TABLE.
TIMESTAMP = timestamp_value | DEFAULT
timestamp_value should be a
Unix epoch timestamp, not a MySQL timestamp.
LAST_INSERT_ID = #
LAST_INSERT_ID(). This is stored in
the binary log when you use LAST_INSERT_ID() in a command that updates
a table.
INSERT_ID = #
INSERT or ALTER TABLE
command when inserting an AUTO_INCREMENT value. This is mainly used
with the binary log.
hdparm to configure your disk's interface! The
following should be quite good hdparm options for MySQL (and
probably many other applications):
hdparm -m 16 -d 1Note that the performance/reliability when using the above depends on your hardware, so we strongly suggest that you test your system thoroughly after using
hdparm! Please consult the hdparm
man page for more information! If hdparm is not used wisely,
filesystem corruption may result. Backup everything before experimenting!
-o async
option to set the filesystem to be updated asynchronously. If your computer is
reasonably stable, this should give you more performance without sacrificing
too much reliability. (This flag is on by default on Linux.)
-o noatime option.
You can move tables and databases from the database directory to other locations and replace them with symbolic links to the new locations. You might want to do this, for example, to move a database to a file system with more free space or increase the speed of your system by spreading your tables to different disk.
The recommended way to do this, is to just symlink databases to a different disk and only symlink tables as a last resort.
The way to symlink a database is to first create a directory on some disk where you have free space and then create a symlink to it from the MySQL database directory.
shell> mkdir /dr1/databases/test shell> ln -s /dr1/databases/test mysqld-datadir
MySQL doesn't support that you link one directory to multiple
databases. Replacing a database directory with a symbolic link will
work fine as long as you don't make a symbolic link between databases.
Suppose you have a database db1 under the MySQL data
directory, and then make a symlink db2 that points to db1:
shell> cd /path/to/datadir shell> ln -s db1 db2
Now, for any table tbl_a in db1, there also appears to be
a table tbl_a in db2. If one thread updates db1.tbl_a
and another thread updates db2.tbl_a, there will be problems.
If you really need this, you must change the following code in `mysys/mf_format.c':
if (flag & 32 || (!lstat(to,&stat_buff) && S_ISLNK(stat_buff.st_mode)))
to
if (1)
On Windows you can use internal symbolic links to directories by compiling
MySQL with -DUSE_SYMDIR. This allows you to put different
databases on different disks. See section 2.6.2.5 Splitting Data Across Different Disks on Windows.
Before MySQL 4.0 you should not symlink tables, if you are not
very careful with them. The problem is that if you run ALTER
TABLE, REPAIR TABLE or OPTIMIZE TABLE on a symlinked
table, the symlinks will be removed and replaced by the original
files. This happens because the above command works by creating a
temporary file in the database directory and when the command is
complete, replace the original file with the temporary file.
You should not symlink tables on systems that don't have a fully
working realpath() call. (At least Linux and Solaris support
realpath())
In MySQL 4.0 symlinks are fully supported only for MyISAM
tables. For other table types you will probably get strange problems
when doing any of the above mentioned commands.
The handling of symbolic links in MySQL 4.0 works the following
way (this is mostly relevant only for MyISAM tables).
mysqld is
not running) or with the INDEX/DATA DIRECTORY="path-to-dir" command
in CREATE TABLE. See section 6.5.3 CREATE TABLE Syntax.
myisamchk will not replace a symlink with the data or index file but
work directly on the file the symlink points to. Any temporary files
will be created in the same directory where the data or index file is
located.
mysqld as root or allow
persons to have write access to the MySQL database directories.
ALTER TABLE RENAME and you don't move
the table to another database, the symlinks in the database directory
will be renamed to the new names and the data and index files will be
renamed accordingly.
ALTER TABLE RENAME to move a table to another database,
the table will be moved to the other database directory and the old
symlinks and the files they pointed to will be deleted. (In other words,
the new table will not be symlinked.)
--skip-symlink
option to mysqld to ensure that no one can drop or rename a file
outside of the mysqld data directory.
Things that are not yet supported:
ALTER TABLE ignores all INDEX/DATA DIRECTORY="path" options.
CREATE TABLE doesn't report if the table has symbolic links.
mysqldump doesn't include the symbolic link information in the output.
BACKUP TABLE and RESTORE TABLE don't respect symbolic links.
Go to the first, previous, next, last section, table of contents.